Description
The TL-SG105PE is a 5-port Gigabit Easy Smart Switch with 4 PoE+ poor, and a quick upgrade with an unmanaged switch. It is specially designed for small bedrijven that can be used to operate PoE-functions without hesitation. From TL-SG105PE you can maximize your PoE devices on your devices, you can send them to e-mail (AP's), IP-camera's and IP-telephones. Via the web base of the interface and the programming of the TL-SG105PE you can access the various functions, network activation, prioritization, PoE Auto Recovery and QoS. However, with port-based, tag-based in MTU VLAN, TL-SG105PE can be used to communicate with more network segments.
4 of 5 Auto-Negotiation RJ45-poorten (poort 1 to tot 4) van de switch ondersteunen Power over Ethernet (PoE)-function. Deze PoE-poorten can be automatically detected by IEEE 802.3af/at-compliant Powered Devices (PD's) and can be detected.
TL-SG105PE has the priority and functions of the system to help you control the overload system. If the stroom is connected to the PoE PD's >= 65 W, it has a higher priority than the PoE-poorten, but the stroom system does not have the highest priority.
Priority (poort 1>poort 2>poort 3>poort 4): Deze functions helpt the system you need to be checked by the system overbelast raakt. Poort 1, 2 en 4 switch to 15.4 W. Also an extra PoE device with 20 W is switched on by poort 3, but the system is used to compensate for poort 4.
TL-SG105PE can be used to activate your network and watch your observers. Via the website's interface, the TL-SG105PE's programming interface includes various functions, networking, prioritization, PoE Auto Recovery and QoS.
Met Port Mirroring, Loop Prevention and Cable Diagnostics functions, can identify TL-SG105PE and localize verbindings problems op jouw bedrijfsnetwerk. Beheerders kunnen ook de prioriteit van het verkeer toewijzen on the basis of poortprioriteit, 802.1P-prioriteit en DSCP-prioriteit, om ervoor te zorgen dat spraak en video altijd duidelijk, soepel en zonder vertraging zijn.
Bovendien ondersteunt de TL-SG105PE MTU VLAN, port-based VLAN en 802.1Q-based VLAN-functies om de beveiliging en de netwerkservices te verbeteren. PoE Auto Recovery automatically does not allow PoE to appear again.
TL-SG105PE is an upgrade to a plug-and-play Unmanaged Switch, which has a high level of power when it comes to power.
TL-SG105PE is ready to be used. Auto MDI/MDI-X crossover op alle poorten maken crossover cables of uplink-poorten overbodig. Auto-onderhandling and poor detection of network connections (10, 100 of 1000 Mbps) and intelligent operation ensures optimal compatibility. This compact format is ideal for desktops and can be used. Dynamic LED lamps are used in real-time and have a working status and can be diagnosed.